Products

Raychem RPG's Products Presence across Oil & Gas, Energy , Transformers and Solar & Energy Management System

Cold Applied Tape


Innowrap’s Coating System is a multilayer polyethylene and butyl rubber coating system used for protecting the external surface of pipelines for oil, gas, petrochemical, waste water underground, and over head pipeline. Installed Innowrap coating system provides outstanding adhesion value and elastic performances that is highly adaptive to forces caused by changes in temperature and severe soil stresses. Furthermore, it is a UV and fungus resistant product offering long term solutions.

It offers a series of coating systems designed to fit the field application of new construction pipes to reconditioning of existing pipelines. It can additionally be applied over existing coatings when reconditioning is needed. It offers today’s coating solutions for ease of application, less labor force, and cost-effectiveness. The system meets or exceeds the requirements of DVGW, AWWA C209 & C214, ANSI, ASTM, API, NACE, NAPCA and other International standards.

Innowrap Product Lines

INNOWRAP 700 - Liquid Adhesive Coating

IW #700 is the first essential part of the Innowrap cold applied coating system. It is highly compatible with the butyl rubber formulation of the Co-Extruded inner coating that provides a smooth uniform coating surface. The never cure tack surfaceof the Innowrap 700 provides ease of application and complete adhesion of the inner layer to steel and butyl rubber. It can be applied using the following methods: brush, rollers, spray and etc. Available in 1 gallon cans, 5 gallon cans and 55 gallon drums. Innowrap 700 is designed to be used on any properly prepared pipe surface. (For more information, see Application Procedure Booklet) Innowrap 700 liquid adhesive coating is recommended for use with the Innowrap cold applied coating systems.

INNOWRAP 730 (In-plant | Rehabilitation) - Inner Layer Coating

IW #730 is a two component Co-Extruded coating consisting of polyethylene and butyl rubber adhesive. It is designed and formulated to work in conjunction with Innowrap 700 liquid adhesive coating. This forms a corrosion barrier for our Innowrap coating system. Material is available in various sizes and thicknesses.

INNOWRAP 740 (In-Plant | Rehabilitation) - Outer Layer Coating

IW #740 is a Co-Extruded outer coating of polyethylene and butyl rubber specifically engineered for mechanical protection layer. It provides protection to the inner layer (corrosion protection) from potential hazards due to backfill operations and soil stresses; as well as protection from chemical, biological attack and ultra violet light. Material is available in various sizes and thicknesses.

INNOWRAP 710 (Hand wrapping) - Joint Coating

IW #710 is a Co-Extruded conformable joint coating consisting of polyethylene and butyl rubber adhesive specifically designed for the corrosion protection of field joints, ells, tees, valves and other pipe fittings. It is designed to be used by hand application or hand wrapping machines. IW #710 is certified under DIN 30672 and EN 12068 Class B-30 standards.

INNOWRAP 711 (In-Plant / Hand wrapping) - Joint Coating

IW #711 is a Co-Extruded conformable joint coating consisting of polyethylene and butyl rubber adhesive designed for hand coating of field joints, ells, tees, valves and other pipe fittings. The high mechanical enhancement and pliable strength, allows it to be used as a outer layer for IW #710 joint coating. This UV stablized coating is approved for both in ground and above ground joint fittings.

Manufactured using the proven Co-Extruded process resulting in the highest degree of inner cohesive strength.
100% adhesion in 24 hours, liquid adhesive to steel and liquid adhesive to the inner coating butyl rubber.
Adhesive is designed to smear and lock resulting in compression above ground, not relying on soil compression.
UV inhibitors are included for additional external protection.
Liquid adhesive formulation is designed to work in conjunction with the inner coatings adhesive, resulting in an effective prevention of stress cracking.
Designed to absorb impact without cracking.
Product formulation offers the industry’s lowest water vapor penetration. Total adhesion system shows reduced requirements for cathodic protection. Co-Extruded process results in zero delamination and product uniformity. Manufactured to meet or exceed industry standards.
Designed to meet any corrosion coating project.
Features roll consistency - no lapped rolls.
Assistance with proper application procedures for guaranteed results
Connect With Us